Wednesday, February 27, 2013

Troubleshooting and Solving Automated Swimming Pool Cleaners




Here are the guidelines:

When a automatic swimming pool cleaner fails, the first achievable problem you should check out is the source of energy. Robotic swimming pool cleaners do not run from a hydraulic system, it runs from AC power. Most of those devices have a light that indicates whether or not something is wrong with the power source. First examine the transformer, which might lead you to exchanging the fuse.
If the unit is still lifeless, then something could be the belts. Like the majority of things, these do wear down, so after a few months of constant wear and tear, they may become worn out which causes the device to be fussy. When replacing this, make sure that the wheel tubes are straight. These are what the belt moves along, so if they're not straight, the belt will fall off, even if it's new.
If the robotic pool area cleaner's power is working, but it is not suctioning right, then bring the cleaner out of the water, power it down and disconnect it. Open up it up and take away the vent cap. Then search for debris and then for any other cover.
After the debris is removed, then check the impeller's rotation. Try to advance it by hand. If you are having difficulty moving it, then plug the device back in and turn it on. If the impeller does not move, after that the motor must have shorted out, and you are going to have to change it out.
If the machine has problems climbing walls, then might have to replace the motor too.
NEVER get rid of the robotic swimming pool cleaner from out of the water by the power cord. This will most likely give you an electric shock!!!


Click here for more week pool service by Gilbert Aquanuts.

Sunday, February 17, 2013

Repair Pool or Replace Pool: When to Determine?


Swimming pool repair is a basic term that can refer to coping with splits in the pool walls, tears in the coating, inoperable or poor filter and pump programs. These types of difficulties demand getting a professional. Many of them are also large, expensive repairs. Being aware of what you're setting yourself up for will allow you to create an informed decision. Sometimes it's not about repairing your pool area but changing a reduced or outdated part of your pool.

Pool Structural Repair
Concrete, vinyl, and fiberglass are the three main types of swimming pool materials. They each have relative advantages and drawbacks. Each one of these can be prone to a different sort of disrepair. Concrete pools can become cracked, especially in colder regions where overwhelming winter temperatures can cause this cracking by way of a freeze-and-thaw process. Small splits can be fixed; bigger cracks may need you to totally overhaul your swimming pool. Vinyl pools are vulnerable to tears in the lining. Again, small tears could be repaired; larger tears might require you to replace the lining. The good thing here is that replacing a liner will obviously be less expensive than replacing concrete. Fiberglass is nearly indestructible but responses to minerals and other chemical substances may cause an ugly discoloration. When this discoloration gets too bad, an acid wash is probably your best bet.

Swimming Pool Repair: Pumps and Filters
Unless of course your pump or filter in time breaks down entirely, it may not always be clear when one isn't working properly. Worse yet, it's possible both the filter and the pump are working fine, but the pool professional installed a method in which the pump and filter don't work specifically well together. This really is more prevalent in older, over ground pools. However, a problem with your pump or filter often means nothing more than a clogged or damaged hose. Even a properly working pump and filter system won't avoid water quality issues without the proper chemical treatments. Check the hoses along with other easily accessible parts of your pool filtration. If you cannot identify the problem, you may need to call a pool professional, but have the ability to explain the exact symptoms and the type of your filtration system so that you as well as your pool professional can successfully exercise the problem.

Safety Features
If a part of your pool system suddenly stops working, it may be a sign that a safety feature has disabled it to safeguard both swimmers in the pool and the pool system itself. Pool repair could be a hassle, but it's superior to electrocution. Pool heaters and pool covers are two installations that often have safety shut-offs. Keep in mind, though, until this sudden shut-off may be an effect of a relatively minor problem that can be easily fixed.

Repair or Replace?
Whatever the nature of your swimming pool repair, it is wise to check with your pool qualified what the situation of your pool will be after the repair. Older filters and pumps can be repaired only to breakdown again the year after. Ask how long the concrete patch should be expected to last. You won't want to spend a lot of money to repair a piece of your pool when replacing it wouldn't cost significantly more. Click here for more week pool service by Gilbert Aquanuts.