Troubleshooting and Solving Automated Swimming Pool Cleaners

Here are the guidelines:

• When a automatic swimming pool cleaner fails, the first achievable problem you should check out is the source of energy. Robotic swimming pool cleaners do not run from a hydraulic system, it runs from AC power. Most of those devices have a light that indicates whether or not something is wrong with the power source. First examine the transformer, which might lead you to exchanging the fuse.
• If the unit is still lifeless, then something could be the belts. Like the majority of things, these do wear down, so after a few months of constant wear and tear, they may become worn out which causes the device to be fussy. When replacing this, make sure that the wheel tubes are straight. These are what the belt moves along, so if they're not straight, the belt will fall off, even if it's new.
• If the robotic pool area cleaner's power is working, but it is not suctioning right, then bring the cleaner out of the water, power it down and disconnect it. Open up it up and take away the vent cap. Then search for debris and then for any other cover.
• After the debris is removed, then check the impeller's rotation. Try to advance it by hand. If you are having difficulty moving it, then plug the device back in and turn it on. If the impeller does not move, after that the motor must have shorted out, and you are going to have to change it out.
• If the machine has problems climbing walls, then might have to replace the motor too.
• NEVER get rid of the robotic swimming pool cleaner from out of the water by the power cord. This will most likely give you an electric shock!!!


Click here for more week pool service by Gilbert Aquanuts.

Repair Pool or Replace Pool: When to Determine?

Swimming pool repair is a basic term that can refer to coping with splits in the pool walls, tears in the coating, inoperable or poor filter and pump programs. These types of difficulties demand getting a professional. Many of them are also large, expensive repairs. Being aware of what you're setting yourself up for will allow you to create an informed decision. Sometimes it's not about repairing your pool area but changing a reduced or outdated part of your pool.

Pool Structural Repair
Concrete, vinyl, and fiberglass are the three main types of swimming pool materials. They each have relative advantages and drawbacks. Each one of these can be prone to a different sort of disrepair. Concrete pools can become cracked, especially in colder regions where overwhelming winter temperatures can cause this cracking by way of a freeze-and-thaw process. Small splits can be fixed; bigger cracks may need you to totally overhaul your swimming pool. Vinyl pools are vulnerable to tears in the lining. Again, small tears could be repaired; larger tears might require you to replace the lining. The good thing here is that replacing a liner will obviously be less expensive than replacing concrete. Fiberglass is nearly indestructible but responses to minerals and other chemical substances may cause an ugly discoloration. When this discoloration gets too bad, an acid wash is probably your best bet.

Swimming Pool Repair: Pumps and Filters
Unless of course your pump or filter in time breaks down entirely, it may not always be clear when one isn't working properly. Worse yet, it's possible both the filter and the pump are working fine, but the pool professional installed a method in which the pump and filter don't work specifically well together. This really is more prevalent in older, over ground pools. However, a problem with your pump or filter often means nothing more than a clogged or damaged hose. Even a properly working pump and filter system won't avoid water quality issues without the proper chemical treatments. Check the hoses along with other easily accessible parts of your pool filtration. If you cannot identify the problem, you may need to call a pool professional, but have the ability to explain the exact symptoms and the type of your filtration system so that you as well as your pool professional can successfully exercise the problem.

Safety Features
If a part of your pool system suddenly stops working, it may be a sign that a safety feature has disabled it to safeguard both swimmers in the pool and the pool system itself. Pool repair could be a hassle, but it's superior to electrocution. Pool heaters and pool covers are two installations that often have safety shut-offs. Keep in mind, though, until this sudden shut-off may be an effect of a relatively minor problem that can be easily fixed.

Repair or Replace?
Whatever the nature of your swimming pool repair, it is wise to check with your pool qualified what the situation of your pool will be after the repair. Older filters and pumps can be repaired only to breakdown again the year after. Ask how long the concrete patch should be expected to last. You won't want to spend a lot of money to repair a piece of your pool when replacing it wouldn't cost significantly more. Click here for more week pool service by Gilbert Aquanuts.

Pool Repair Services: Pool Caulking!

Pool repairs are necessary over a regular span of time. If you see that the water in your water resource is not circulating, the edges of your haven are splitting up and the water isn't heating at your desired level, it is the time for you to develop maintenance. However, it may be a complex process, method and course of action if you have no experience of handling it before. Following are several pool repair tips that can help you to save a great deal of money:

Change and Modify a Pump:

A pump meant and intended for your water resource is critical equipment and application that circulates your pool water. While changing a pump, it is advisable to just remember to purchase and obtain a encouraged and proposed replacement part with the matching same horsepower and flow of the previous item. To get the most relevant information in this concern, it is important to examine the existing pump. Examine yourself or contact an professional to get the right information of your pump.

Pool Sealing Repairs:

When repairing just about any caulking, make sure that you prep the surface correctly. Clean the leaks and seal them well and do not allow it to get wet as it may further cause an additional leak into your water resource. You can further place backer rod foam inside the joint and then seal off over the top of the area.

Pool Warming:

The water temperature of your respective oasis is generally impacted by many reasons including:

Incorrect setting of Thermostat
Uneven outside temperature
Replacement of High limit switch

Pool repair is a daunting and complicated endeavor hence you should reply on gurus! Click here for more week pool service by Gilbert Aquanuts.

How to Repair Pool Tiles

For those who have a swimming pool, frequent servicing and occasional maintenance are the price you have to pay for that greater rewards of having a swimming pool to relish. At some stage in moment, you'll have to repair or replace some pool tiles. Before you decide to drain your pool and get ready for a long, drawn-out repair process, please read on. Fixing pool tiles isn't necessarily as hard as it can sound. If it's not a big job that needs an expert swimming pool maintenance service, it is possible to possibly build-it-yourself and could not even ought to empty the pool.

Pool tiles come loose or drop off for any selection of reasons. Occasionally this is because of very poor craftsmanship once the tiles were laid, but often there's another reason:
Degradation of your cement bed behind the tiles can occur when water penetrates in by means of splits in the grouting or tile and penetrates into the cement behind it.

Intense changes of temperature when tiles above the waterline are repeatedly heated by sunlight and rapidly cooled by splashing water might cause these to come loose.In any event, the tiles could be replaced. Whether they can get replaced below the water line without partially or fully draining the swimming pool is dependent upon just how much, if any, of the bed behind them arrives and on the kind of adhesive you use:
If the concrete originates out to a significant depth, you will have to build up the base. You will have to drain the swimming pool first to below the degree of the tiles, allow the area to dry out and make up a sub-base a layer at any given time.
When the concrete has not deteriorated, you are able to replace the tiles while using appropriate tile adhesive. Both above water and below water adhesives are available. Check with the local pool contractor or pool accessory supplier and get their recommended adhesive. Follow the directions on the package and replacing your tiles ought to be a comparatively easy DIY job.
Give the tiles plenty of time to set and then grout around them. For underwater tiles, there are silicone products available. For above water tiles, use a recommended pool tile grout only. Standard tile grouting will begin to crack or crumble and need replacing.

How to Repair Pool Tiles

Cracked pool tiles are not only unsightly, they are able to lead to bigger problems if left unattended. For these, you will have to drain the swimming pool enough to expose them to the air, clean them thoroughly and ensure they're totally dry before you begin:
Start by giving the tiles a coat of gloss oil paint tinted to the colour of the tiles. Apply a second coat if required after the first coat has dried.

After permitting the paint to dry, mix clear epoxy resin and dab it in to the cracks. This will seal them.
This rough guide to repairing pool tiles gives you the basics. For more information, find a pool builder in your area and ask for their advice. They can give you complete instructions and supply you with the suitable adhesives and grouting materials. It's always best to get a professional to clean and repair your pool once a year just before the beginning of the swimming season, so if you visit a potential trouble spot, you may want to leave the task to a pool maintenance professional. Click here for more week pool service by Gilbert Aquanuts.

How To Find And Fix A Problem In Your Swimming Pool

"I'm having to add water to my swimming pool every week. Do I have a leak?" Depending on the climate near your home, it is not unusual to be losing a 1/4" of pool water a day due to evaporation. This means almost 2" a week! The greatest factors affecting this are humidity, wind, and air and water temperature.
To find out if you really have a leak inside your swimming pool, fill a bucket with water from the pool and set it on the steps of your pool with the the surface of the bucket above water level. This will keep the water in the bucket exactly the same temperature as the pool. If you do not have steps, you can look at evening out the bucket on the top ladder tread. At this point, compare the water loss between your bucket and your pool over a period of a few days, the more, better. We are assuming that your bucket does not have a hole in it! If you notice a big difference, you've got a leak!

Now let's realize that leak! Fill the pool to its normal level and measure the level. A piece of duct tape is fantastic for this. Next together with your filter system running the whole time, wait 12 to twenty four hours and appraise the lack of water. Then refill the pool back to the same level along with the filter system off, wait exactly the same period of time (also over the same area of the day, ie. 8 AM to 8 AM or 7 PM to 7 AM) and measure the water loss.
If you're losing more water using the filter system running, the leak is around the pressure side of your plumbing somewhere PAST the impeller of the pump. If you are losing less water with the filter system not running, the leak is on the vacuum side of your plumbing somewhere BEFORE the impeller of the pump. Please note that in this case, most of the time the pool only loses water when the system is off and never when it's on. If the water loss is identical, then your leak is incorporated in the structure of the pool and not in the plumbing.

Let's deal with a leak in the plumbing first. We are going to believe that there is not an obvious leak (one that you can see) on the filter system. Did you check where your backwash line comes out? There are two methods to find this leak. First, you can pressure test the lines, then dig, following the leaking line till you find it. You can also call in the local leak detection service. We'd highly recommend the latter, unless you like to dig. Professionals will use "geophones" to listen for the leak and just dig where necessary!

Now lets look at a leak in the structure of a concrete pool. You will need some food coloring for this, and you'll want to switch off the pump at least an hour before you do this. In a concrete pool, any cracks in the shell are usually obvious. By squeezing out the food coloring near the crack, you will see the crack pull the food coloring in. That will show you where the pool is leaking. Yes, you may have to get in the pool to do this, but isn't that why you got the pool in the first place? If there are no visible cracks, you will want to squeeze out the food coloring around any of the items that pierce the shell of the pool (main drain, returns, lights, etc.). Make sure to check the "mouth" of the skimmer where the plastic of the skimmer meets the concrete. This area is very susceptible to movement and quite often separates creating a leak.

Once the leak is found, it is easy to fix using a patching material. Most of them works under water. After patching, check again with your food coloring to make sure you plugged the leak. Please note that if you patch near a fitting, you will want to leave the pump off while it cures, so the flow of water doesn't wash the patch away.

What if you have a vinyl pool with a leak? A leak can be a little harder to find and fix in a vinyl pool, but it's not impossible. We would propose that you first check around all the items that pierce the liner (main drain, returns, lights, etc.). If you find that the liner has pulled away or perhaps is leaking behind a fitting, we would Highly recommend that you simply call in your local pool professional at this point. If you mess this repair up you could be easily looking at a new liner!
If you don't detect a leak around the fittings, you will need to search the liner itself. A lot of vinyl liners have a pattern on the walls or bottom which can make it difficult to see a hole. Sometimes by running your hand over the floor and walls you may feel a tear or puncture that's not easily visible. If you have a friend who is a diver, he or she can do the job a lot easier with a tank than you can by holding your breath. Note: only certified divers ought to be using diving gear, even in a pool. Sometimes there is a depression on to the floor which might indicate erosion brought on by the flow of water. After finding the leak it's an easy matter to patch, utilizing a vinyl patch kit and following a directions. Click here for more week pool service by Gilbert Aquanuts.

The Advantage of Having Pool Repair Service

It is very important to locate and perform a swimming pool repair as soon as the problem occurs, or else the problem will only worsen. The greater the making of your pool was, (and the more knowledgeable your service provider was), the less problems you ought to have. Some problems however, are inevitable.

Kinds of Pool Problems
Listed here are common types of swimming pool problems that need repair:

Broken plaster: Extreme, cracking or damaged plaster has to be repaired or the water will breakdown the concrete beneath the plaster. It may be essential to resurface your pool, for the way severe the damage.
Cracks: One such problem from sun damage or the earth’s movement.
Removal of rust: rust could mean that we now have bigger problems, for example, rust can happen because there is something wrong with the rebar.
Problems can also occur using the grout, tiles, bonding, and beams. These should also be repaired.

Maintenance Tips To Prevent Repair

To prevent problems from arising, we recommend day to day pool care, by following these tips:Two times a week
Check the pH level. The water should be slightly alkaline and have a pH between 7.2 and 7.6, as this is the best level for chlorine to be effective.
Check the chlorine level, to ensure bacteria and algae are being eliminated.
Check the skimmer basket is clean of debris and dirt so this dirt does not end up back in the pool.

Once a week
Do a shock treatment, in the evenings. These may be bought from a pool shop and will enhance the level of chlorine in your pool, destroy germs and enhance the appearance of your pool. Click the link to read more about keeping your swimming pool water crystal clear. Ask a worker in the sales department for more information. Add algaecide, in order to control algae from growing in your pool. It is best to do this the morning after you do the shock treatment. Ensure you get a good quality algaecide, otherwise your pool tiles can get damaged and a swimming pool tile repair will be necessary. Add ‘Metal Out’. Tiny deposits of metal are occasionally present in pools, ‘Metal Out’ will ensure that these metal particles are destroyed. Add clarifier, which will get rid of cloudy water and keep your pool looking clear and sparkly. Clarifier likewise helps with water purification, as it causes tiny particles (that are too small to be removed by the filtration system) to group together and form larger particles that won’t make it through the filtration system.

Monthly
Check the calcium level, which should be at just the right balance. If the pool water contains too much calcium, scale formation will occur, whereas whether it is too low, corrosion will occur. Have a sample of pool water to a pool shop for them to test this for you.

Mid-season
Clean swimming pool filters
The Pool Team comes out and inspect your pool mid-season to make certain things are running as it should be. Don’t Sweat It.

The Pool Team is a specialist, wholesale pool company. We can offer you a commercial or residential swimming pool service, to areas in and around Johannesburg, and we can also perform maintenance checks for you to prevent problems or ensure there aren’t already some existing ones. We can also offer you a wide variety of quality pool products, wherever you're in the world, to meet your requirements and budget. Whether you need a concrete swimming pool repair, fiberglass swimming pool repair, gunite swimming pool repair, inground swimming pool repair, or any other type of swimming pool repair or renovation, we can make it better and also have you back to doing your laps very quickly! Click here for more week pool service by Gilbert Aquanuts.

How a Pool area Filter System Works

Today we’re likely to speak about how a pool area filter system works. There is a pump timer, a swimming pool pump along with a filter. We’ll discuss the use of the pump, the filter, the plumbing and just how all of this works together.

Water travels from the pool to the pump. Water comes in through two pipes. One comes from the pool skimmer and the other comes from the primary drains at the bottom of the pool. The water is pulled into the pump around the suction side. Just before entering the pump the water moves by way of a basket called a strainer pot. The basket is a secondary means for filtering the water to avoid debris from getting into the pump chamber where the impeller spins. The water leaves the pump on the discharge side or “pressure side” of the plumbing. The water is pressed from the pump into the filter. The filter serves to get rid of dirt and debris from the water. The water that is clean then leaves the filter and, sometimes, passes through a chlorinator and back to the pool. It is best to chlorinate the water after it leaves the filter so that less chlorine goes into the pump and filter which can be harmful to the equipment.

There are three popular types of filters. One is a sand filter. The sand collects and traps debris. To release the debris the sand filter needs to be backwashed. Another filter is a cartridge filter. They have a greater surface area and are reduced maintenance. One or two times per season a cartridge filter must be hosed off and cleaned. The last type of a filter is a DE or diatomaceous earth filter. DE is a fine powder that coats the grids of the filter housing. DE filters are the best for trapping the smallest of debris. DE filters must also be backwashed occasionally and the DE power needs to be replaced with each backwash.

Backwashing a filter is the simple procedure for running the filter in reverse and flushing the filter of debris. You know it is time to backwash when the pressure in the filter rises above 20 psi. This means there is an excessive amount of debris in the filter and water is struggling to go through the system. If back-washing doesn't work or pressure increases rapidly it may be because the pool has a lot of debris or the filter needs to be manually cleaned.

Sometimes after your pump continues to be off for a long time of your time it can be hard to re-prime it. This is because all the water has drained from the filter and the plumbing. To facilitate priming, completely close the main drain valve. Fully open the skimmer valve. Place the filter valve in the circulate position. Then turn the system on. This will isolate the filter from the circuit thereby asking the pump only to prime the plumbing. In seconds you should have a full and constant water flow through the pump. Once this has been established, quickly shut off the pump. Move the filter valve into the filter position and restart the pump. The prime continues and fill the filter. Don’t forget to bleed the air from your filter when prime is established.
Click here for more week pool serivce by Gilbert Aquanuts.